1. Front page
  2. Industry & Gear
  3. Flux Redux Glock PDW stock kit: Forgotten Weapons first look
Industry & Gear3 min read

Flux Redux Glock PDW stock kit: Forgotten Weapons first look

Flux Redux Glock stock kit: Forgotten Weapons' Ian McCollum takes Flux Defense's collapsing stock and front grip for Gen 4 and Gen 5 Glocks to the range on a Glock 17L.

J.D. WhitfieldIndustry Correspondent ·
Flux Redux Glock PDW at range
Frame from the Forgotten Weapons video.

Why it matters: The Redux takes Flux Defense back to the Glock, the pistol its first product was built for. McCollum's video shows how the company worked around the fact that a Glock's frame is the serialized part.

Forgotten Weapons host Ian McCollum has posted a range video of the Flux Redux, a collapsing stock and front grip kit that turns a Glock pistol into a compact personal defense weapon, or PDW. In the video, "Flux Redux: A New Collapsing Stock and Front Grip Kit for a Glock PDW", McCollum describes the Redux as an updated reintroduction of Flux Defense's very first product, a shoulder stock for the Glock. He mounted the kit on a Glock 17L for his first shooting session with it.

How the Flux Redux stock kit attaches to a Glock frame

McCollum explains the design by comparison with a project he understands Flux to be developing: a chassis for the Ruger RXM, the pistol Ruger builds with Magpul. The RXM has a serialized fire control unit that can be moved into a new chassis. On a Glock, the frame itself is the legal firearm, so Flux had to bolt parts onto the existing frame instead of replacing it. McCollum says that approach would generally be "a bit less elegant of a solution," but that Flux has "done a pretty impressive job here."

The kit has two main parts. At the rear, a new backstrap pins in place, carries the stock, and hooks in alongside the frame's beavertail. McCollum says that is why the Redux fits Gen 4 and Gen 5 Glocks but not Gen 1, 2, 3 or 6. At the front, an assembly locks over the accessory rail on the Glock frame, holds a spare magazine, and adds its own Picatinny rail so a light can go back on. The front assembly also carries a shield meant to keep the support hand from drifting in front of the muzzle. McCollum removed it on his build, because the 17L's muzzle already reaches the end of the assembly.

The stock follows the design Flux developed for its Flux Raider: press a lever and it extends fully and locks. When Flux announced the kit earlier this month, Guns.com reported an MSRP of $349.99.

Glock stock vs. brace: the SBR question

The example in the video wears a true shoulder stock, and McCollum says the gun is a registered short-barreled rifle. He says Flux ships the kit with an attachment that does not qualify the gun as an SBR, for buyers concerned about that. He declines to go into the legal details, saying the situation "is still so weird" that he would rather not try.

Range impressions: Glock 17L, Gideon optic and the holster gap

“On a Glock, the frame itself is the legal firearm, so Flux had to bolt parts onto it instead of replacing it.”

J.D. Whitfield, The Reticle

For the range session McCollum chose the 17L, a long-slide Glock with a six-inch barrel, on the reasoning that the gun would be a carbine anyway. He topped it with a Gideon Optics Granite Comp red dot and zeroed it with six rounds. He describes the optic as a large competition sight that would be big on a carry pistol but is narrower than the stock assembly, so it stays out of the way on a PDW.

His overall assessment is that the gun "shoots nicely." He says the stock, a pair of wire bars with rounded edges, is "not the most comfortable" and not "a nice proper stock," and frames that as the trade-off for a package that is very small and concealable when collapsed. He did not fire the gun as a pistol with the stock retracted, saying deployment is quick and positive enough that he sees little reason to.

The drawback he names is carry. To his knowledge no holsters exist for the Redux, and because the stock bars run along the sides of the gun even without the front assembly, it will not fit existing Glock holsters. He suggests a thigh rig of the kind used for an MP7 or a similar PDW, and says it would not be hard for someone to make a dedicated holster. The muzzle brake on his gun, he adds, is cosmetic: it came off a Kalashnikov USA KP-9 that uses the same muzzle threads.

McCollum says Flux sent the Redux kit free of charge for the video and Gideon Optics supplied the optic. He bought the Glock 17L himself after finding he owned no Glock the kit would fit. He closes by saying he will keep covering new PDW platforms "as long as people keep making them."

For context
  • Under federal law the serialized frame of a Glock is the firearm, which is why stock and chassis makers attach parts to it instead of swapping it out.
  • The Ruger RXM, developed with Magpul, houses its serialized fire control insert in a removable stainless steel chassis that fits into interchangeable grip modules.
  • Fitting a shoulder stock to a pistol with a barrel under 16 inches makes it a short-barreled rifle under the National Firearms Act, which requires federal registration.
  • Flux Defense's original Glock product, covered by Guns.com in January 2019, was marketed as a holsterable pistol brace.
Sourced from

Flux Redux: A New Collapsing Stock and Front Grip Kit for a Glock PDW

Forgotten Weapons · YouTube

Watch the original
J.D. Whitfield

Industry Correspondent. Part of the desk that reads firearms media closely, so you can read it well.

Tags: Flux Redux, Flux Defense, Glock stock kit, Glock PDW, Forgotten Weapons, Ian McCollum, Glock 17L, Flux Raider, Gideon Optics Granite Comp, Ruger RXM chassis, short-barreled rifle, YouTube

More from The Reticle

All coverage →